Directions For Use
Please wear gloves when using this product. Apply the product neat through a watering can or sprayable equipment. Always test in a small inconspicuous area before using to ensure it is suitable and desired effect is achieved. Ensure that the area to be treated is cleared of garden furniture and other items so that they are not in accidental contact with the product. Ensure that all loose dirt and other physical debris is removed first by brushing prior to application.
Apply directly to the problem area of the surface to be treated and leave to soak in. It is recommended to leave product on surface between 2 - 4 hours to allow time to work (minimum 15 minutes), product will begin to react as it gets to work. Scrub with a brush if you feel it is required. When sufficient time has been allowed for the product to work, rinse off the area thoroughly.
For best results use a pressure washer to rinse off. Repeat as necessary for badly affected areas. Coverage: Approximately 20 – 25 square metres (5 Litres).
When to Use
Product can be applied to slightly damp surfaces or dry surfaces. Do not apply to surfaces where they are saturated from recent rainfall or if rain is due within the time 2-4 hours required to treat the surface.
Where to Use
May be used to clean black spots, lichen, moss and stains, while removing mold and mildew. Suitable to use on block paving, concrete flags, steps, paths, patios, driveways and other outdoor hard surfaces. Keep off vegetables, flowers, shrubs and lawns
Ensure garden sprayers are thoroughly cleaned after use to prevent damage or destroying plants on later usage.
Store in a cool, dry place.
Bottle: Plastic is widely recycled.
Label: PP is widely recycled.